WEN LA421F 5-Inch Flat Lathe Chuck Jaws for Bowl Turning

Description

5 in. Flat Lathe Chuck Jaws for Bowl Turning
Remember when you could turn your own bowls. Fill your house with as many bowls as possible with a set of WEN Flat Lathe Chuck Jaws. Designed specifically for the WEN LA4275 2.75 in. Lathe Chuck, these steel jaws install easily to help support bowls, goblets and other larger circular workpieces. This package includes eight 1/2 in. rubber pins and eight 3/4 in. rubber pins to keep your workpiece nice and secured without causing any damage to the workpiece. These pins can be adjusted to any of the 32 mounting holes, allowing you to remove tenons and mortises on bowl bottoms of all sizes. When attached to a WEN LA4275 Lathe Chuck, these jaws can hold bowls anywhere from 2.6 in. to 5.5 in. Dia. Remember when you could make your own bowls. Remember WEN.
Modify your current WEN lathe chuck to keep bowls properly secured
Hold round workpieces ranging from 2.6 in. to 5.5 in. Dia
Easily adjust the holding diameter with the 4-position peg system
Includes eight 1/2 in. rubber pins, eight 3/4 in. rubber pins and 32 mounting holes
Compatible with the WEN LA4275 2.75 in. 4-jaw lathe chuck