-40%
Sherline Collet 117803 WW Collet, 0.3 mm (.012”)
Sherline Collet 117803 WW Collet, 0.3 mm (.012”)

Sherline Collet 117803 WW Collet, 0.3 mm (.012”)

$ 25.31

Availability: 22 in stock
  • California Prop 65 Warning: CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • MPN: Does Not Apply
  • Type: Lathes Accessories
  • Item must be returned within: 30 Days
  • Suitable For: Metal
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Model: 117803
  • Brand: Sherline

    Description

    Sherline Collet 117803 WW Collet, 0.3 mm (.012”)
    Collets provide a quick, easy method of mounting cylindrical parts or bar stock in the lathe with a great deal of centering accuracy. Each collet is actually a small, precision 3-jaw chuck that fits into a special tapered adapter in the headstock. A drawbar that passes through the headstock and threads into the back side of the collet is used to draw the collet up into the tapered adapter. The adapter causes the jaws of the collet to close down, gripping the part to be machined. Typically, collets provide a very accurate part mounting system, but each size collet can accommodate only a small range of diameters of approximately ±.001" (.02mm).
    WW collets differ from milling collets (P/N 3060) in that they have a hole all the way through the collet and drawbar. The maximum diameter stock that can pass entirely through the collet is 3/16" or 4.5mm, although collets are available up to 5/16 and 8.0 mm. The WW collets that are larger than the through-hole diameter are sometimes referred to as "pot" chucks.