-40%
Sherline 3.0mm Mill Collet 3092 (Front & Back View)
Sherline 3.0mm Mill Collet 3092 (Front & Back View)

Sherline 3.0mm Mill Collet 3092 (Front & Back View)

$ 13.17

Availability: 12 in stock
  • Condition: New
  • Brand: Sherline
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • California Prop 65 Warning: CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
  • All returns accepted: Returns Accepted
  • Suitable For: Metal
  • MPN: Does Not Apply
  • Type: Lathes Accessories
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Model: 3092

    Description

    Sherline 3.0mm Mill Collet 3092 (Front & Back View)
    Sherline milling collets are designed to be used with the Morse # 1 internal taper that is standard on the both the Sherline lathe and vertical mill. Because of the shallow angle of the Morse #1 taper when the drawbolt is tightened, greater clamping force can be applied when compared to the to the clamping pressure of WW collets. Therefore, it is recommended the use of these milling collets for holding miniature size end mills (3/16" or 1/4" shank), #1 and smaller center drills or Dremel bits (1/8" shank), and assorted other cutters. Cutting tools held by these collets must have a shank size within .001" of the manufactured size. Because of the shallow taper angle, these collets will not loosen from the spindle without backing the drawbolt off a couple of revolutions and tapping the drawbolt to free the collet.