PIP 3024GK 3000W (240V 2 wire output) Solar Charger 500VDC , 24V battery(less)

Description

NOTE::
Factories are still not fully operational, limited quantities.
PIP3024GK - 500V Solar Input, 24V Battery, 230V Output ONLY! This Model can accept up to 500V DC Solar input, Only 230V Output and Input, European Model In the USA, L1 will need to be connected to the N (Neutral) Input, and L2 will need to be conencted to L (Live) input, in order to input 240V into the inverter. The output Terminals (N & L) will essentially output 230VAC
This Inverter cannot be connected to a 240V breaker box, this is a 2 wire 240V inverter (no Neutral ),  Do not connect to 240V main breaker box, only for use with 240V appliances  (no 120V)
Please check out our other "LV" models for split phase output.
This Inverter is NOT split phase
If you don't understand what split phase is, please do some research on YouTube first. as an  example, here is a good start:  https://www.youtube.com/watch?v=JtQQGJ8Z82Y
Check out the other images on the main listing for all the specifications.
Maximum output  - 3000W Pure Sine Wave
Output Voltage - 220 - 240V Single Phase
Output Frequency 50/60 Hz
Battery Voltage 24V DC  (optional)  Batteryless support  (can power the load without a battery)
80A MPPT - 500V Solar Charger allows more solar panels in series with thinner wire and longer runs.
Built in 60A Utility Charger
Genset Starter Dry Contact
NOT PARALLELABLE
USB and RS232 Communication
I use one of these to run my 230V Well pump without battery, or as a High Voltage Solar Charge Controller to charge my 24V battery, and then I use a PIP LV2424 Inverter  tied to the same battery for 120V output.
Take note of the special wiring instructions at the beginning of this description.
Welcome to ask questions  (web search my eb name)
Ian