MPPT 3KW 110VAC/120VAC Off-Grid Solar Inverter 24V Pure Sine Wave Inverter 100A

Description

Store category
Sign Up Now !
You may also like
MPPT 3KW 110VAC/120VAC Off-Grid Solar Inverter 24V Pure Sine Wave Inverter 100A
Product Description
3000W Hybrid Solar Inverter AC 110V DC 24V 50HZ/60HZ Pure Sine Wave Inverter 100A MPPT Charge Controller
Overview:
The is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. Thanks to DSP control and advanced controlal gorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging;and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
Feature
1. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
2. Two output modes: mains bypass and inverter output; uninterrupted power supply
3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging
4. Advanced MPPT technology with an efficiency of 99.9%.
5. Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6. ON/OFF rocker switch for AC output control.
7. Power saving mode available to reduce no load loss
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation by PV solar or mains, allowing access of lead acid battery and lithium battery
10. 360 all round protection with a number of protection functions.
11. Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Basic System Architecture:
The figure below shows the system application scenario of this product. A complete system consists of the following parts:
1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.
4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.
5. All-in-one solar charge inverter: The energy conversion unit of the whole system.
Specific system wiring method depends on the actual application scenario.
Models
ISolar MLV3KW-U
AC mode
Rated input voltage
110/120VAC
Input voltage range
(90Vac-140Vac)±2%
Frequency
50Hz/ 60Hz (Auto detection)
Frequency Range
47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection
Circuit breaker
Efficiency
>95%
Conversion time (bypass and inverter)
10ms (typical)
AC reverse protection
Available
Maximum bypass overload current
40A
Inverter mode
Output voltage waveform
Pure sine wave
Rated output power (VA)
3
000W
Rated output power (W)
3
000W
Power factor
1
Rated output voltage (Vac)
120VAC
Output voltage error
±5%
Output frequency range (Hz)
50Hz ± 0.3Hz/60Hz ± 0.3Hz
Efficiency
>92%
Overload protection
102%
(110%
Load >125% ±10%: report error and turn offthe output after 5 seconds;
Peak power
45
00
VA
Loaded motor capability
2
HP
Output short circuit protection
Circuit breaker
Bypass breaker specifications
40A
Rated battery input voltage
24V (Minimum starting voltage 22V)
Battery voltage range
20.0Vdc~33Vdc±0.6Vdc(Undervoltagealarm/shutdownvoltage/overvoltagealarm
overvoltage recovery... settable on LCD screen)
Power saving mode
Load
≤
25W
AC charging
Battery type
Lead acid or lithium battery
Maximum charge current
60A
Charge current error
± 5Adc
Charge voltage range
18.0Vdc~33Vdc
Short circuit protection
Circuit breaker and blown fuse
Circuit breaker specifications
40A
Overcharge protection
Alarm and turn off charging after 1 minute
PV charging
Maximum PV open circuit voltage
100VDC
PV operating voltage range
30-100VDC
MPPT voltage range
30-95VDC
Battery voltage range
18-33VDC
Maximum output power
1600W
PV charging current range (can be set)
60A
Charging short circuit protection
Blown fuse
Wiring protection
Reverse polarity protection
Certified specifications
Certification
CE(IEC/EN62109-1,-2)
ROHS2.0
EMC certification level
EN61000
Operating temperature range
-15°C to 55°C
Storage temperature range
-25°C ~ 60°C
Humidity range
5% to 95% (Conformal coating protection)
Noise
≤
60dB
Heat dissipation
Forced air cooling, variable speed of fan
Communication interface
USB/RS485(WiFi/GPRS)/Dry node control
Size (L*W*D)
378mm*280mm*103mm
Weight (kg)
6.2
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We only accept paypal.
• Payment should be completed within 7 days of auction closing. Or unpaid dispute will be filed for closing
auction.
• An unpaid case will be filled after 8 days.
Delivery details
We ship to your eBay address.
• Please check your shipping address carefully, it can't be changed if order completed.
Terms of sales
Refund or replacement request is available after receiving the package within 1 month.
About us
A wonderful store!!!There are various goods that you can choose,all the goods are in the lowest price and good quality! Welcome!!!
Our main Products include Solar charge controller, MPPT regulator,PWM battery charger. Grid tie inverter,Pure sine wave inverter,Off grid inverter,Waterproof solar inverter. MC4 solar panel connector,Solar Panel. Welcome to visit our store and we hope to built a friendly long-term business relation ship with you. Thank you.
Contact us
1. If you receive an item and it does not work properly or you do not like it because of any reason , we have a 100% refund / return policy. We will ship you a new item or refund your payment.
2. All of items with one-year warranty, any quality question, we can
provide the replacement parts with FREE
,
but you need pay the shipping cost;
3. Before opening a return request, please contact us about the issue FIRST.
If the item fails during use, please contact us immediately.
We will provide the best solution.
For customers who leave positive feedback, we will provide additional discounts in next purchase
On Jul-07-21 at 23:39:25 PDT, seller added the following information: